2" Pot Still Do-it-yourself Kit

Pot Still Kit 008.JPG
Pot Still Kit 011.JPG
Pot Still Kit 012.JPG
Pot Still Kit 009.JPG
pot still & beer keg stills 003.JPG
copperpro pot still 003.jpg
Running Jons Still 018.JPG
Pot Still Kit 008.JPG
Pot Still Kit 011.JPG
Pot Still Kit 012.JPG
Pot Still Kit 009.JPG
pot still & beer keg stills 003.JPG
copperpro pot still 003.jpg
Running Jons Still 018.JPG
sale

2" Pot Still Do-it-yourself Kit

from 139.95

If you have the skills necessary to solder copper and want to make a 2" pot still, this kit is for you. Fits on modern beer kegs with a tap fitting of 2 1/2" O.D.  Comes with all the parts and thermometer shown in the listing photos. Also included are the garden hose attachments. 

The stainless steel ferrule can not be soldered and must be silver brazed or TIG welded which requires special skills and equipment, so we have given you the option of having us braze it or you can do it yourself.  If you have us braze the ferrule, we also drill the stops out of the condenser tees so you don't have to buy an expensive drill bit. If you choose not brazed, some fitting may be required.

This still will produce 1.5 - 2 gallons per hour of 120-140 proof alcohol. A higher proof can be obtained with multiple distillations.

Scroll down to watch video of this still running.

copper pipe length is 12" - Contact us if you want a longer column.

Total column height is 17"

total condenser length is 30"

water jacket length is 18"

Made with heavy gauge type L copper pipe.

We do not use cheap, thin walled Drain Waste Vent (DWV) pipe on our stills.

Comes with assembly instructions.

Stainless Ferrule:
Quantity:
Add To Cart