3" High Volume Reflux Still Do-it-yourself Kit

HV DIY Kit 007.jpg
HV Still 008.JPG
HV DIY Kit 006.JPG
HV DIY Kit 004.JPG
HV Still 012.JPG
HV Still 003.JPG
HV DIY Kit 007.jpg
HV Still 008.JPG
HV DIY Kit 006.JPG
HV DIY Kit 004.JPG
HV Still 012.JPG
HV Still 003.JPG
sale

3" High Volume Reflux Still Do-it-yourself Kit

from 429.95

This kit is for building our high volume reflux still column. 

It comes with all copper parts pre-cut and ready for assembly. Also included is the fully assembled flow control kit and cooling hoses, clamps and gaskets, digital thermometer and 1.5 lbs of copper mesh packing. Kettle & reducer is not included. This column is designed to attach to a 3" Tri-clover fitting. If you plan on attaching this kit to a beer keg or 2" kettle, you will need to purchase a 2" x 3" reducer and an additional 2" clamp & gasket.

The stainless steel ferrules must be turned on a lathe so they will slip into the copper pipe perfectly for brazing. They can not be soldered and must be silver brazed or TIG welded which requires special skills and equipment, so we have given you the option of having us braze them for you or you can do it yourself. There are 5 ferrules to braze on this kit. If you have us braze the ferrule, we also drill the stops out of the condenser tees so you don't have to buy an expensive drill bit. If you choose "not brazed", some fitting may be required.

Photos of parts show the kit as you will receive it with the ferrules brazed.

Total column height is 46 inches.

Normally ships in 1-2 weeks.

Stainless steel ferrules (5):
Quantity:
Add To Cart