2″ Reflux Still DIY Kit


This kit is for building our 2″ cooling management still column. Check photos to see finished product. Column is 34 inches long.

Made with heavy gauge type L copper pipe.

We do not use cheap, thin walled Drain Waste Vent (DWV) pipe on our stills.

The kit comes with all copper parts pre-cut and ready for assembly. Also included is the fully assembled flow control kit and cooling hoses, clamp and gasket, digital thermometer and copper mesh packing.


The stainless steel ferrule can not be soldered and must be silver brazed or TIG welded which requires special skills and equipment, so we have given you the option of having us braze it or you can do it yourself. If you have us braze the ferrule, we also drill the stops out of the condenser tees so you don’t have to buy an expensive drill bit. If you choose not brazed, some fitting may be required.

This still will run up to 3 gallons per hour as a pot still (120-140 proof) and 1-2 gallons per hour when run as a reflux column (150-180 proof).

See it run on video below

Weight N/A
Stainless steel ferrule:

Not Brazed, Brazed