Moonshine still DIY Kits

The 2 inch reflux still DIY kit comes with all copper parts pre-cut and ready for assembly. Also included are the cooling hoses, fully assembled flow control kit, clamp and gasket, digital thermometer and copper mesh packing. 

Made with heavy gauge type L copper pipe.

Column is 34 inches long. 

This still will run up to 3 gallons per hour as a pot still (120-140 proof) and 1-2 gallons per hour when run as a reflux column (150-180 proof).

See it run on video below

If you have the skills necessary to solder copper and want to make a 3" pot still, this kit is for you. Fits on modern beer kegs with a 2" x 3" adapter. Comes with all the parts, thermometer and garden hose attachments shown in the listing photos. Similar kits available online do not come with the clamp & gasket, hose kit, or thermometer.

Total column height is 21"

total condenser length is 40" - 3/4" pipe

water jacket length is 24" - 1 1/4" pipe

Made with heavy gauge type M copper pipe.

We do not use cheap, thin walled Drain Waste Vent (DWV) pipe on our stills.

The stainless steel ferrule can not be soldered and must be silver brazed or TIG welded which requires special skills and equipment, so we have given you the option of having us braze it or you can do it yourself. If you have us braze the ferrule, we also drill the stops out of the condenser tees so you don't have to buy an expensive drill bit. If you choose not brazed, some fitting may be required.

If you have the skills necessary to solder copper and want to make a 2 inch still, the 2 inch pot still diy kit is for you. Fits on modern beer kegs with a tap fitting of 2 1/2" O.D. Comes with all the parts and thermometer shown in the listing photos. Also included are the garden hose attachments.

This still will produce around 2 gallons per hour of 120-140 proof alcohol. A higher proof can be obtained with multiple distillations. This still is the same one we use on our beer keg whiskey still.

See video below.

Choose from digital or hermetically sealed dial thermometer.